"Supreme" Faux Wood Blinds

Note:
All sizes below can be ordered to these exact sizes as an Outside Mount, otherwise the factory will deduct 3/8" off the width for an Inside Mount
I.E. - For a window measuring 6-5/8", you can order a 6-1/2" Outside Mount.
Otherwise you'll need to order 6-7/8" and it will come to you at a 6-1/2" net width

Available Sizing:
Minimum Net Size: 6-1/2" x 16"
Maximum Net Size: 96" x 96" (max 48 sq ft)

For Ordering Info:
Inside Mount: 6-7/8 x 16" up to 96"
Outside Mount: 6-1/2" x 16" up to 96" (max 48 sq ft)

Standard Features:
• Made from combined plastics to create the lightest faux wood blinds in the industry today.
• Cordless with Tilt Rod Control on Left side
• Customizable Wand length. (See the Options & Features tab)
• 2″ or 2-1/2″ Routeless Privacy Slat Sizes – No Extra Charge!
• "EuroStyle" Valance-Free Head-Rail
• Several Colors and Sizes
• Meets Child Protection Standards
• Lifetime "Limited" Warranty

Surcharge Options:
• Wand Tilt on Right Side of Blind
• 2-1/2" Modern Curved Valance
• 3-1/4" Designer Crown Valance
• Printed, Wood Look, Colors
• Cut-Outs (per side)
• Keystone for side-by-side Valances
• Side Mount Brackets for up to 37" width
• See "Epic" Shelf for widths over 37""
• Shims

Without a Valance
Fully Recessed: 2-11/16"
Semi-Inside Mount: 1-5/8" Minimum

With the Modern Curved Valance
Fully Recessed: 3-7/8"
Partial Inside Mount: 2-11/16" with 7/8" Valance returns
Semi-Inside Mount: 1-5/8" with 2" Valance returns
Valance Returns for a totally Outside Mounted blind will be fitted to the same depth as the back of the brackets. 3-9/16"

With the Crown Valance
Fully Recessed: 4-1/16"
Partial Inside Mount: 2-11/16" with 7/8" Valance returns
Semi-Inside Mount: 1-5/8" with 2" Valance returns
Valance Returns for a totally Outside Mounted blind will be fitted to the same depth as the back of the brackets. 3-9/16"

Motorization Is Not Available on "Supreme" Faux Wood Blinds

Cordless (included)
Make sure you can reach the top of the window to raise and lower the shade.
Blinds less than 15" wide will come with a Center Tilt Wand and not have a way to raise and lower the blind. It will come fitted to your dimensions.

Tilt Wand Location
Tilt Wand is standard on the left side of the blind.
The Tilt Wand is available in the right side for a small surcharge
For blinds 6-1/2" up to 15" wide, the wand will be in the center of the blind and the blind will be fitted to your dimensions but not have a way to raise the blind. (typical for SideLight windows next to Entry doors)

Customize Tilt Wand Length
Standard Wand length is 1/3-1/2 the height of the blind.
If you would like a different length, tell us in the Notes before Adding to Cart.
You can order: 11-3/4", 17-3/4", 29-3/4", 38-1/4", 47-1/4" or 60"
47-1/4" and 60" will come to be twisted together.

Valances
A 2-1/2" Modern Valance is available or
A 3-1/4" Crown Valance is available.
For 2 or more blinds ordered to be butted together side-by-side, a "Common Valance" can be ordered. It will come flush cut at the connecting points with connectors where the valances meet and are butted together.
Please tell us in the "Notes", before final check out, you would like a "Common Valance" when installing 2 blinds side-by-side or end-to-end.

Shim
Usually used as a spacer to lower or bring forward the brackets on an installation where there is a protruding frame or trim.

Side Mount Bracket
Is an “L” shaped bracket to install brackets in an arched window or a place where you want the blind lower in a window.

Cut-Outs
Add one per side that will require a cut out to fit around back-splashes, tiles or window trims.
Available Cut-Out sizes in 1/8" increments wide and any height:
For Blinds less than 8-7/8" - max. 1/2" wide cut-out
For Blinds 8-7/8" to 26-5/8" - Up to 1-1/2" wide cut-out
For Blinds 26-5/8" to 39" - Up to 3" wide cut-out.
For Blinds 39" and over - Up to 4-1/2" wide cut-out.
Please tell us the size of your Cut-Out, W x H, in the Notes before Adding to Cart.