
"Elite" Roller Shade
Note:
The factory will deduct 3/8" off your ordered width for an Inside Mount.
In other words, if the minimum is 18", you'll need to order 18-3/8" for an Inside Mount.
Cordless (Standard)
Minimum size: 18" x 12"
Maximum size: 96" x 96" (Max 64 sq ft)
Cord Loop Control
Minimum size: 8" x 12" Order Inside Mount: 8-3/8"
Maximum size: 118" x 144" (Max 118 sq ft
Cord Loop QuickRelease
Minimum size: 12" x 12" Order Inside Mount: 12-3/8"
Maximum size: 118" x 144" (Max 118 sq ft)
The factory will deduct 3/8" off your ordered width for an Inside Mount.
In other words, if the minimum is 18", you'll need to order 18-3/8" for an Inside Mount.
Cordless (Standard)
Minimum size: 18" x 12"
Maximum size: 96" x 96" (Max 64 sq ft)
Cord Loop Control
Minimum size: 8" x 12" Order Inside Mount: 8-3/8"
Maximum size: 118" x 144" (Max 118 sq ft
Cord Loop QuickRelease
Minimum size: 12" x 12" Order Inside Mount: 12-3/8"
Maximum size: 118" x 144" (Max 118 sq ft)
Standard Details:
• Aluminum tube sized to meet factory specs for the fabric chosen
• “No Tug” Cordless PrimoLift
• Continuous Cord Loop
• Beaded Nylon Cord or Stainless Steel Operating Chain
• Plain, color-coordinated or Fabric Covered Hem Bar
• One 30” Fiberglass Operating Pole for Cordless
• Meets Child Protection Standards
• Some Fabrics Meet in NFPA 701 flame resistance including solar screen fabrics.
Shim
Usually used as a spacer to lower or bring forward the brackets on an installation where there is a protruding frame or trim.
Dual Shade - Roller Shades
Allows for 2 shades (brackets are made for a stack installation. Usually a Room-Darkening fabric in the rear and a reverse roll Light-Filtering in the front.
Coupled Shades - Roller Shades
2 shades on one roll that move together when raised and lowered.
Day/Night Shade
2 shades ordered for 1 window. Usually a sheer and room-darkening or light-filtering. Come with a special “stacked” bracket for installation of 2 Roller Shades.
Quick Release
Is a one-click cord-loop cooperation to lower the shade. Continuous pull to raise the shade
Aluminum Light Guard
Is an “L” shaped aluminum stick-on trim to reduce direct light from coming in at the edge of the blinds or shades.
Wood Light Guard
Is an “L” shaped stick-on wood trim to reduce direct light from coming in at the edge of the blinds or shades.
Room Darkening
Roller Shade light reduction up to approx 75%.
360 Light Guard - Roller Shades Only
A complete track on the left, right and bottom of the shade with a light “flap” at the top for almost 100% room-darkening.
Magnetic Hold Down
Replaces the flexible clear pin brackets for holding the bottom of the blind/shade to a door. The magnet side comes attached to the bottom rail of a blind/shade. Just screw the washer side to your door in the proper position for a concealed attachment.
Sheer
Softens your view while providing approx 50% UV light reduction. Is not for privacy.
Day/Night Shade
2 shades ordered for 1 window. Usually a sheer and room-darkening or light-filtering.
• Aluminum tube sized to meet factory specs for the fabric chosen
• “No Tug” Cordless PrimoLift
• Continuous Cord Loop
• Beaded Nylon Cord or Stainless Steel Operating Chain
• Plain, color-coordinated or Fabric Covered Hem Bar
• One 30” Fiberglass Operating Pole for Cordless
• Meets Child Protection Standards
• Some Fabrics Meet in NFPA 701 flame resistance including solar screen fabrics.
Shim
Usually used as a spacer to lower or bring forward the brackets on an installation where there is a protruding frame or trim.
Dual Shade - Roller Shades
Allows for 2 shades (brackets are made for a stack installation. Usually a Room-Darkening fabric in the rear and a reverse roll Light-Filtering in the front.
Coupled Shades - Roller Shades
2 shades on one roll that move together when raised and lowered.
Day/Night Shade
2 shades ordered for 1 window. Usually a sheer and room-darkening or light-filtering. Come with a special “stacked” bracket for installation of 2 Roller Shades.
Quick Release
Is a one-click cord-loop cooperation to lower the shade. Continuous pull to raise the shade
Aluminum Light Guard
Is an “L” shaped aluminum stick-on trim to reduce direct light from coming in at the edge of the blinds or shades.
Wood Light Guard
Is an “L” shaped stick-on wood trim to reduce direct light from coming in at the edge of the blinds or shades.
Room Darkening
Roller Shade light reduction up to approx 75%.
360 Light Guard - Roller Shades Only
A complete track on the left, right and bottom of the shade with a light “flap” at the top for almost 100% room-darkening.
Magnetic Hold Down
Replaces the flexible clear pin brackets for holding the bottom of the blind/shade to a door. The magnet side comes attached to the bottom rail of a blind/shade. Just screw the washer side to your door in the proper position for a concealed attachment.
Sheer
Softens your view while providing approx 50% UV light reduction. Is not for privacy.
Day/Night Shade
2 shades ordered for 1 window. Usually a sheer and room-darkening or light-filtering.
Motorization Is Available on "Elite" Roller Shades
See the "Motorization" Tab.
Standard Features:
• “No Tug” Cordless PrimoLift or Continuous Cord Loop
• Beaded Nylon Cord or Stainless Steel Operating Chain
• Plain, painted color-coordinated or Fabric Covered Hem Bar
• Reverse "Water Fall" Roll Option at No Charge
• One 30” Fiberglass Operating Pole for Cordless
• Meets Child Protection Standards • Some Fabrics Meet in NFPA 701 flame resistance including solar screen fabrics.
Surcharge Options:
• Dual Shades
• Coupled Shades
• Raceway (for easy installation)
• Curved Fascia, Curved Fabric Wrapped Fascia
• 4-1/2" Wood Valance
• 4-1/2” Fabric Wrapped Valance
• 7” Fabric Wrapped Balance
• QuickRelease with Raceway
• Aluminum Light Guard • Wood Light Guard
• Additional 30” Fiberglass Operating Pole for Cordless
• Cordless Operating Tool Only
• Keystone for Oversized Valances
• Magnetic Hold Downs
• Shims
See the "Motorization" Tab.
Standard Features:
• “No Tug” Cordless PrimoLift or Continuous Cord Loop
• Beaded Nylon Cord or Stainless Steel Operating Chain
• Plain, painted color-coordinated or Fabric Covered Hem Bar
• Reverse "Water Fall" Roll Option at No Charge
• One 30” Fiberglass Operating Pole for Cordless
• Meets Child Protection Standards • Some Fabrics Meet in NFPA 701 flame resistance including solar screen fabrics.
Surcharge Options:
• Dual Shades
• Coupled Shades
• Raceway (for easy installation)
• Curved Fascia, Curved Fabric Wrapped Fascia
• 4-1/2" Wood Valance
• 4-1/2” Fabric Wrapped Valance
• 7” Fabric Wrapped Balance
• QuickRelease with Raceway
• Aluminum Light Guard • Wood Light Guard
• Additional 30” Fiberglass Operating Pole for Cordless
• Cordless Operating Tool Only
• Keystone for Oversized Valances
• Magnetic Hold Downs
• Shims
Tip 1:
When ordering a cordless shade, make sure you can reach the top of the window to be able to rise and lower the shade. If not able to reach, we recommend you order a wand with the handle tool or the handle tool to be able to put on the end of paint brush/roller handle. Note: You will receive one 30" wand tool per Roller Shade order.
Tip 2:
If ordering a shade with a cord-loop, whether a nylon bead chain or stainless bead chain, you can order a length longer than the standard 60% of the blind height. We recommend no longer than 4” above the bottom of the window/blind height so the pulling distance to raise or lower the shade will be easier.
When ordering a cordless shade, make sure you can reach the top of the window to be able to rise and lower the shade. If not able to reach, we recommend you order a wand with the handle tool or the handle tool to be able to put on the end of paint brush/roller handle. Note: You will receive one 30" wand tool per Roller Shade order.
Tip 2:
If ordering a shade with a cord-loop, whether a nylon bead chain or stainless bead chain, you can order a length longer than the standard 60% of the blind height. We recommend no longer than 4” above the bottom of the window/blind height so the pulling distance to raise or lower the shade will be easier.
Note:
All sizes below can be ordered to these exact sizes as an Outside Mount, otherwise the factory will deduct 3/8" off your ordered width for an Inside Mount
You'll need to add 3/8" to the minimums below to your order for an inside mounted blind/shade.
Motorization Is Available on "Elite" Roller Shades
• Battery Wand
• 12v Plug-in DC Transformer
• 110v AC Plug-in
• The plug can be cut off and hard-wired by a licensed electrician.
Motorization Sizing Info:
• Battery Wand and 12v DC Adapter
Minimum Size: 14" x 12"
Maximum Size: 96" x 144"
•110v AC Plug-In
Minimum Size: 20" x 12"
Maximum Size: 96" x 144"
•110v AC Plug-In For over 96" Wide
Minimum Size: 27" x 12"
Maximum Size: 118" x 144"
Motorization Info:
• Motor - Battery-Operated or Plug-In 12v DC Transformer or 110v AC Plug-In
• Batteries are not Included due to air freight laws
• Requires 8- AA Lithium batteries per Motor
• Requires 1- CR2450 (Quarter size) Lithium battery per Remote Control
• More Shades can be added to an existing Remote Control for Shades ordered at a later date
• Extra Remote Control(s) (For Control in Different Rooms if desired)
• 48” or 96” Extension Cable for Motors for longer runs to a battery wand or 12v DC Adapter
• Extensions can connected together for even longer runs
• 12v DC Adapter motors come with a 59" cord
• 110v AC Plug-in Motors come with a 2 prong 118" cord attached
• The 110v AC plug can be cut off and hard-wired by a licensed electrician.
All sizes below can be ordered to these exact sizes as an Outside Mount, otherwise the factory will deduct 3/8" off your ordered width for an Inside Mount
You'll need to add 3/8" to the minimums below to your order for an inside mounted blind/shade.
Motorization Is Available on "Elite" Roller Shades
• Battery Wand
• 12v Plug-in DC Transformer
• 110v AC Plug-in
• The plug can be cut off and hard-wired by a licensed electrician.
Motorization Sizing Info:
• Battery Wand and 12v DC Adapter
Minimum Size: 14" x 12"
Maximum Size: 96" x 144"
•110v AC Plug-In
Minimum Size: 20" x 12"
Maximum Size: 96" x 144"
•110v AC Plug-In For over 96" Wide
Minimum Size: 27" x 12"
Maximum Size: 118" x 144"
Motorization Info:
• Motor - Battery-Operated or Plug-In 12v DC Transformer or 110v AC Plug-In
• Batteries are not Included due to air freight laws
• Requires 8- AA Lithium batteries per Motor
• Requires 1- CR2450 (Quarter size) Lithium battery per Remote Control
• More Shades can be added to an existing Remote Control for Shades ordered at a later date
• Extra Remote Control(s) (For Control in Different Rooms if desired)
• 48” or 96” Extension Cable for Motors for longer runs to a battery wand or 12v DC Adapter
• Extensions can connected together for even longer runs
• 12v DC Adapter motors come with a 59" cord
• 110v AC Plug-in Motors come with a 2 prong 118" cord attached
• The 110v AC plug can be cut off and hard-wired by a licensed electrician.