"Choice" Honeycomb/Cellular

Note:
All sizes below can be ordered to these exact sizes as an Outside Mount, otherwise the factory will deduct 3/8" off your ordered width for an Inside Mount
You'll need to add 3/8" to the minimums below to your order for an inside mounted blind/shade.

Standard Cordless
Minimum Net Size: 11-1/2" x 10"
Maximum Net Size: 96" x 86" or if more than 86 high then,
Minimum Net Size: 25" x More than 86" up to 120"
Maximum Net Size: 96" x 86" (max 48 sq ft)

Cordless Top Down/Bottom Up
Minimum Net Size: 15" x 10"
Maximum Net Size: 96" x 86"

Cordless Top Down/Bottom Up, Day/Day and Day/Night
Minimum Net Size: 15" x 10"
Maximum Net Size: 96" x 86"

Woven Fabric Standard Cordless
Minimum Net Size: 15-1/2" x 10"
Maximum Net Size: 86" x 86"
Max height 62" when less than 19" wide.

Woven Fabric Cordless Top Down/Bottom Up
Minimum Net Size: 15-1/2" x 10"
Maximum Net Size: 78" x 86"
Max height 62" when less than 19" wide.

Cord Loop & QuickRelease
Minimum Net Size: 15" x 10"
Maximum Net Size: 120" x 144" (max 80 sq ft)

Cord Loop Top Down Only
Minimum Net Size: 24" x 10"
Maximum Net Size: 120" x 144" (max 80 sq ft)

PrimeFit 3/8" Pleat
Minimum Net Size: 8-1/2" x 6"
Maximum Net Size: 50" x 86"

PrimeFit
Minimum Net Size: 8-1/2" x 6"
Maximum Net Size: 72" x 86"

PrimeFit Dual Shade 3/8" Pleat
Minimum Net Size: 8-1/2" x 2"
Maximum Net Size: 50" x 86"

PrimeFit Dual Shade
Minimum Net Size: 8-1/2" x 12"
Maximum Net Size: 72" x 86"

PrimeFit for Sloped Windows
Minimum Net Size: 8-1/2" x 6"
Maximum Net Size: 59" x 120" (max 48 sq ft)

Standard Features:
• 9/16" Single Pleat Size
• Cordless or Cord Loop Lift
• Due to child protection laws, pull cords are no longer available
• Universal Hidden Mounting Brackets
• Meets Child Protection Standards

Surcharge Options:
• 3/8”, 3/4” or 1-1/4” Single Pleat Sizes
• ½” or ¾” Double Honeycomb Pleat Sizes
• Sheer Fabrics (in all pleat sizes)
• Top-Down/Bottom-Up
• Room-Darkening Fabrics (in all sizes)
• Day/Night or Day/Day Dual Shades
• PrimeFit
• PrimeFit with Frame
• PrimeFit Day/Night or Day/Day Dual Shades
• QuickRelease
• Side Mount Brackets
• Magnetic Hold Downs
• Aluminum Light Guard
• Cut-Outs for Base Moulding and • Backsplashes
• 30" Cordless Operating Pole with Tool (for hard to reach)
• Cordless Operating Tool Only (for hard to reach)
• Specialty Shapes

Fabric Type
100% Nylon and Polyester
Does not absorb moisture
No problem in humid areas

Cell/Honeycomb Sizes
Single cell is available in 3/8", 9/16’, 3/4" and 1-1/4" pleat sizes.
Double cell is available in 1/2" and 3/4" pleat sizes.

Enhancements
Cordless Top Down/Bottom Up
Cord Loop Top Down Only with for Shades wider than 8' and up to 10'
Top Down Only with Motorization

Optional Cord Loop Control
Available with "Quick Release" and Top Down Only lift controls

Color Options
Comes in a multitude of light-filtering and room-darkening colors.

• Vertical Honeycomb Installation Instructions - PDF

• Motorized Honeycomb Installation Instructions - PDF

• PrimeFit Honeycomb Installation Instructions - PDF

• PrimeFit Honeycomb with Frame Installation Instructions - PDF

• PrimeFit Sloped Honeycomb Installation Instructions - PDF

• PrimeFit Sloped Honeycomb with Frame Installation Instructions - PDF

• Special Shape Honeycomb with Frame Installation Instructions - PDF

Motorization is Available on "Choice" Honeycomb Shades
See the information at the bottom of this section.

For Non-Motorized:
Cordless (included)
Make sure you can reach the top of the window to raise and lower the shade. If not able to reach, we recommend you order a Pole Attachment or Metal Cordless Operating Pole, if available (below).

Top Down/Bottom Up - Honeycomb
Can lower the top of the shade and raise the bottom of the shade to any position(s) in the window

Top Down Only - Honeycomb
Made for windows longer than 8 feet and up to 10 feet wide.
Cannot raise the bottom of the shade when when the top of the shade is in any lowered position in the window. Comes with a cord-loop control only to operate the shade.

Continuous Cord Loop
Usually ordered when cordless is too high. Custom lengths can be ordered and are usually 4 inches from the bottom of the window.
There is a small surcharge for more than an 84” length Cord Loop control.

Shim Usually used as a spacer to lower or bring forward the brackets on an installation where there is a protruding frame or trim. Aluminum Light Guard
Is an “L” shaped aluminum stick-on trim to reduce direct light from coming in at the edge of the blinds or shades.
It has a peel & stick strip on the short edge of the “L” shape.

Wood Light Guard
Is an “L” shaped stick-on wood trim to reduce direct light from coming in at the edge of the blinds or shades.
It has a peel & stick strip on the short edge of the “L” shape.

Magnetic Hold Down
Replaces the flexible clear pin brackets for holding the bottom of the blind/shade to a door.
The magnet side comes attached to the bottom rail of a blind/shade. Just screw the washer side to your door in the proper position for a concealed attachment.

Cut-Out
On one or both sides of a shade that will require a cut out to fit around back-splashes, tiles or window trims.
See the specs for more details in limitations.

Room Darkening
A Honeycomb lining causing light reduction up to 90%.

PrimeFit
PrimeFit is a cordless open/close shade made to fit with the shade cords next to your window casing on each side.and has no top down/bottom up cords exposed between the rails of the shade.
72 inch maximum width. See the sizing specs.

PrimeFit Day & Night
Two shades with one center control for sheer, light-filtering and light- filtering or room-darkening.

PrimeFit with Frame
Comes with a frame for door or skylight applications.

Day/Night or Day/Day Shade
2 shades ordered for 1 window. Usually a sheer and room-darkening (Day/Night) or light-filtering (Day/Day).
The area in the top of a Top Down/Bottom Up Shade is filled in with one of your fabric choices. The Light-Filtering or Room-Darkening can be on the top or the bottom of the shade.

Fire Rated
Has a higher fire rating for hospital or other commercial applications.

Motorization - Available on "Choice" Honeycomb/Cell Shades
Motorize a single shade or group of shades.

RF Motorization Upgrade:
• Motor(s) with 1 Remote Control
• Battery-Operated or Plug-In 12v Transformer
• Batteries are not Included due to air freight laws
• Requires 8- AA Lithium batteries per Motor
• Requires 1- CR2450 (Quarter size) Lithium battery per Remote Control
• 48” or 96” Extension Cable for Motors

Remote Control
You can order one remote per shade or group of shades.
Each remote has 15 channels and can run up to 20 shades on each channel.
Only add this option to ONE BLIND to prevent receiving extra remotes.
If ordering multiple remotes, tell us which shades are to be connected to which channel.

Low Voltage Extension Cable for Motor (48’’ or 96”)
Allows for battery wand placement for an easier reach or if a transformer cable isn’t long enough to reach a 110v outlet.

Note:
When ordering a cordless shade, make sure you can reach the top of the window to be able to rise and lower the shade. If not able to reach, we recommend you order a wand with the shade handle tool or the handle tool to be able to put on the end of paint brush/roller handle.
Another option - See the next note.
If ordering a shade with a pull cord or cord-loop, you can order a length longer than the standard 60% of the blind height. We recommend no longer than 4” above the bottom of the window/blind height so the pulling distance to raise or lower the shade will be easier.

Question and answer tabWith rich materials, and an even richer history, “Choice” Honeycomb Shades Feature award-winning designs, exclusive options and industry leading construction – for no matter what the elements have in store. “Choice” Honeycomb Shades – More Choices, More Comfort, More Energy Efficiency. Choose from hundreds of fabric options, single cell or double cell, 6 cell sizes and a multitude of lift systems — includes child-safe cordless as well as motorized options. “Choice” honeycomb shades have a stylish answer for any lifestyle or light control need.

Product Video

Note:
All sizes below can be ordered to these exact sizes as an Outside Mount, otherwise the factory will deduct 3/8" off your ordered width for an Inside Mount
You'll need to add 3/8" to the minimums below to your order for an inside mounted blind/shade.

Motorization Is Available on "Choice" Honeycomb Shades
• Battery Wand
• 12v Plug-in Transformer
• 110v AC Plug-in is not available

Standard Motorized
Minimum Net Size: 22" x 10"
Maximum Net Size: 120" x 144" (max 80 sq ft)

Motorized Top Down Only, Day/Day, Day/Night
Minimum Net Size: 31" x 10" (35" wide when greater than 72" high)
Maximum Net Size: 120" x 144" (max 80 sq ft)

Motorization Info:
• Motor - Battery-Operated or Plug-In 12v Transformer Adapter
• Batteries are not Included due to air freight laws
• Requires 8- AA Lithium batteries per Motor
• Requires 1- CR2450 (Quarter size) Lithium battery per Remote Control
• More Shades can be added to an existing Remote Control for Shades ordered at a later date
• Extra Remote Control(s) (For Control in Different Rooms if desired)
• 48” or 96” Extension Cable for Motors for longer runs to a battery wand or 12v Adapters
• Extensions can connected together for even longer runs
• 12v Adapter motors come with a 59" cord.